I was unable to get my favorite station, which is at 89.5 mhz, when I first got this radio. It would only tune down to about 91 mhz. With the help of Muhammad from Brisbane, Australia, I learned that by turning the left adjuster (see above) slightly, I could easily extend the radio's lower-frequency tuning range.

Be sure to go to the Becker board for help on this sort of thing (http://members4.boardhost.com/beckerboard/).

Becker of North America (http://www.harmanbecker.us/) sponsors the board and also rebuilds these radios.

Back Panel Connections

Connections on the back:

black wire: positive 12 volt connection

brown wire: ground

two, round-pin connector: speakers - the lower pin is the ground side

six pin connector: test point for factory

spade connectors: antenna control

Back to the Automotive Page